Regenerative Turbine Pumps Monoblock model Stainless steel

UND・UOD

Low NPSH regenerative turbine pump

Applications

General industrial applications
Transferring high temperature washig media (alcohol)
Transferring low boiling point liquid Integrated to variety of OEM machines

Features

Low NPSH model with special design of pump construction
Radically reduce footprint of OEM equipment
SiC - Special Carbon mechanical seal (model UND-J) as an option available for pure water (low-viscosity liquid) application

Request the catalog , technical data

Performance

Specification Data

SI unit
Series		UND	UOD *2
Total head		Max. 30 m	Max. 35 m
Capacity		Max. 50 L/min	Max. 75 L/min
Fluid temp.		~90 ℃
Connection		Rc thread
Material	Casing / cover	SCS13
	Impeller	SUS304
	Mechanical seal	SiC × SiC × PTFE
	O-Ring	PTFE
	Shaft	SUS316L
Motor	Open drip proof (S)	50/60Hz: 100/110/115/200/220/230V
		0.2 ~ 0.4kW
		JP22 Insulation . Class: E
	3 Phase indoor motor	50Hz: 200V 　60Hz: 200/220V
		0.2 ~ 1.5kW
		IP44 Insulation . Class: E or F
	Increased safety motor (A)	50Hz: 200V 　60Hz: 200/220V
		0.2 ~ 0.75kW
		IP44 Insulation . Class: E



USA unit
Series		UND	UOD *2
Total head		Max. 98.5 ft	Max. 115 ft
Capacity		Max. 13.2 gpm	Max. 19.8 gpm
Fluid temp.		~194 ℉
Connection		Rc thread
Material	Casing / cover	SCS13
	Impeller	SUS304
	Mechanical seal	SiC × SiC × PTFE
	O-Ring	PTFE
	Shaft	SUS316L
Motor	Open drip proof (S)	50/60Hz: 100/110/115/200/220/230V
		1/4 ~ 1/2 HP
		JP22 Insulation . Class: E
	3 Phase indoor motor	50Hz: 200V 　60Hz: 200/220V
		1/4 ~ 2 HP
		IP44 Insulation . Class: E or F
	Increased safety motor (A)	50Hz: 200V 　60Hz: 200/220V
		1/4 ~ 1 HP
		IP44 Insulation . Class: E
*1 All motors for 0.75kW or above are complied with IE3 standard.
*2 Only 32A connection available for UOD.